Bring an Eye-catching Look Home with Vintage Faux Stone Peel and Stick Wall Tile
If you want to make a charming rustic space at home, then you should think about making a brown stone wall. This brown vintage stone peel and stick wall tile have a very beautiful natural 3D stone pattern, just by peeling and sticking, you can easily DIY a pretty brown faux stone wall in your living room, bedroom, kitchen, or anywhere you like!
Feature
-
Stunning 3D Embossed Texture: Realistic 3D surfaces perfectly simulate various real decorative tiles and are lightweight and flexible.
-
Premium Quality: Made of eco-friendly materials, no dioxins. Resistant to water and heat, no color fading.
-
Stronger Upgraded Adhesive: Stick firmly to the smooth & clean surface and available on lightly textured walls.
-
Fast and Easy Installation: Just peel and stick! No grout, no cement, and no mess! Easy cut with the utility knife or the scissors. Perfect for a wall decor DIY project.
-
Widely Applicable: Living Room, TV Wall, Bedroom, Kitchen, Bathroom, Laundry Room, Hallway, Office, RV/Camper, et.
Product Detail
-
Primary Material:PVC
-
Surface Type: Matte
-
Water Resistant: Yes
-
Heat Resistant: Yes
*Our product pictures are actual pictures. Photography on this page is for representation only. Please note that the tile photographed may appear to have a slightly different hue on a screen due to screen resolution, color settings, and a variety of other factors.
*Purchase Enough Tiles at A Time. Please consider 10% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
What‘s Include
- 1/10 Sheets Per Pack
- 9.7 Square Feet/ 0.9 ㎡ for 10 sheets
- 11.8 Inches x 11.8 Inches x 0.1 Inches/ 30 cm x 30 cm x 0.3 cm Per Sheet
Easy Installation
-
Step 1– Thoroughly clean and dry your wall.
*Tips: If your walls are freshly painted, wait up to three weeks before applying tiles.
-
Step 2– Plan where you want to install and cut the size accordingly to better fit the wall.
-
Step 3– Peel off the backing and stick side by side for a seamless appearance.
-
Step 4– Firmly once you are certain of placement with a plastic smoother to ensure best possible adhesion, especially the grout lines or the most concave area of the tile surface.
IMPORTANT TIPS
- Typically the backing adhesive will complete the bond to the wall within 48 hours. After 24 hours of installation, Press the grout lines firmly again to ensure more perfect adhesion.
- Our adhesive tiles can be placed on all clean and sleek surfaces. They are not suitable for outdoor settings or on the floor.
- If you want to remove the tile, use a heat gun or a blow dryer to warm up the glue and pull softly starting with the corners, that won’t damage the wall.
- In long-lasting usage, we recommend keeping 12 inches or 30 cm away from the center of the stove and fireplace.
- We do not recommend installing our 3D Wall Decor Tiles in your shower since they will be in direct contact with water.
